RoadRun sensor family – Laser sensors for road profiling

LIMAB offers laser sensors for Road Profiling and measurements of rutting, IRI, longitudinal profile, transverse profile, and texture. Road Profiling is a very demanding sensor application and requires high sampling speed, high accuracy, and reliability in harsh environments. LIMAB has taken all this into account and developed the Road Profiling product family RoadRun System. All RoadRun sensors are self-contained and all signal processing is done in the sensors. RoadRun System comes with an Ethernet interface.

Basic Specification
The RoadRun System sensors are equipped with Ethernet interface.

Please find below the available sensor versions from LIMAB.

Article No Product Sampling frequency/Output update frequency Measurement Range Interface Application
96574 RoadRun SR System 4 kHz 200 mm Ethernet Rutting, Transverse profile
96610 RoadRun MR System 4 kHz 1000 mm Ethernet Rutting, Transverse profile, Side projection
96575 RoadRun SR System 32 32 kHz 200 mm Ethernet Texture, Roughness (IRI)

Operating Principle
All RoadRun sensors use the principle of optical laser triangulation and will measure directly to almost any conditions of the road.

Rugged and industrial design
The RoadRun sensor is specially designed for road profiling applications. All sensors have double windows in order to minimize the risk for condensations and are passing leakage and mechanical chock tests before shipment.

Increased resolution and accuracy
The RoadRun System sensor has an integrated center-of-gravity evaluation of the measured distance and a 16-times sub-pixling algorithm.

Wide power supply voltage rating
10V .. 36V DC.

Range mask property
The possibility to perform range masking of each individual sensor concerning the measurement range will minimize the number of spare sensors.

Ethernet
RoadRun System sensors are with an Ethernet interface.

Accessories for system builders
In order to facilitate sensor integration, LIMAB provides different accessories for road profiling system builders.

No extra control unit
The RoadRun sensor is self-contained without need for any external control units. This saves integration time and weight.

Low sensitivity for secondary reflections and background radiation
The RoadRun is designed to minimize influences from the surroundings such as reflections and radiations.

Low noise
The RoadRun family includes state-of-the-art sensors with a very low noise ratio.

Specification RoadRun SR System MR System SR System 32
Part No 96574 96610 96575
Stand off (SO) 200 mm 300 mm 200 mm
7.9” 3.9” 7.9”
Measuring range (MR) 200 mm 1.000 mm 200 mm
9.1” 39.4″ 9.1”
Measuring rate (Hz) 4.000 4.000 32.000
Resolution SR: 0,01 mm
SR: 0.0004″
MR: 0,1 mm
MR: 0.004″
Interfaces
Service and configuration Ethernet Ethernet Ethernet
Measurement data output Ethernet Ethernet Ethernet
Synchronization and trigger function RS422 RS422 RS422
General
Laser wavelength 670 nm 642 nm 642 nm
Laser power 8 mW 8 mW 20 mW
Laser class 3B 3B 3B
According to EN 60825-1:2014 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Operating temperature 0-40°C 0-40°C 0-40°C
32-104°F 32-104°F 32-104°F
Sensor weight SR: 1,3 kg
SR: 2.9 lbs
MR: 3,0 kg
MR: 6.6 lbs
Supply 10-36 VDC 10-36 VDC 10-36 VDC
Dimensions (mm) SR: 165 x 112 x 44 mm
SR: 6.5 x 4.4 x 1.7”
MR: 300 x 155 x 54 mm
MR: 11.8 x 6.1 x 2.1″
Protection class IP67 IP67 IP67