The LIMAB WireProfiler 3D system measures the outer diameter and ovality of bars and wire rods. The system can be installed in cold or hot rolling applications. The WireProfiler 3D integrates four LIMAB ProfiCura 2D sensors for an accurate measurement of the produced product. The WireProfiler system has proven its reliability among several of the top quality steel tube producers in the world and gives instant feedback to the operators in order to reduce the mill set-up time and improve the production yield.
|Product Shape||Dimension (mm)||Dimension (inch)||Temperature|
|Round||Up to 150||up to 6||0-1200°C / 32-2200°F|
|Larger dimensions on request|
The WireProfiler 3D integrates up to four LIMAB ProfiCura 2D laser sensors. The ProfiCura sensors are based 2D laser triangulation and in the WireProfiler 3D system these sensors are mounted on a base plate around the object to be measured. Due to the technology the complete product is scanned and the measurement accuracy is unaffected by vibrations as well as other movements of the material.
- Diameter and ovality measurements of hot or cold rolled bars and wire rods
- Final inspection and NDT-area for quality assurance
The system provides easy to read real time 2D and 3D profile graphs, numerical values with warning and out-of-tolerance limits indicated so that the operators instantly can see where process issues are developing.
The software is designed for client/server mode with the possibility of connecting up to 10 clients to one server. The client has an operator interface which displays the measurement results in numerical values, in different trend graphs, in 2D cross sections views as well as a 3D graphical view. All measured values are logged to a database, which makes it possible to replay all measurements for different post production analyses and claims. Network TCP/IP is provided to Level 2 and for remote support
The operator interface includes a 3D presentation of the bars and wire rods. This feature gives the possibility to rapidly detect rolling mill problems like eccentric or damaged rolls.
The WireProfiler 3D is delivered with a calibration tool for the system calibration. The calibration procedure takes 10-15 minutes to perform
The WireProfiler 3D can be equipped with a sliding table on rails which makes it possible to take the system out of the production line for maintenance and calibration
Forced air cooling
The WireProfiler 3D is delivered with a forced air cooling system that makes installation simple, reduces the running costs and keeps the internal temperature of the gauge stable. In addition the air is used to keep the optics clean eliminating regular maintenance.
LIMAB can provide a complete turn-key solution. The WireProfiler 3D includes all hardware, LIMAB-made sensors and software needed for any mill installation. LIMAB provides commissioning, training and on-going product support and service.
High performance diameter and ovality measurements
Very accurate diameter and ovality measurements with a full scan around the circumference of the product. The WireProfiler 3D system measures with a high speed and performance.
Mill setup time reduced
Mill setup time at product change dramatically reduced. Less number of test products before correct size.
Eliminates manual inspection of hot products by operators
The WireProfiler 3D is designed for the harsh environment in a steel mill, which includes a careful selection of the gauge material, effective air-purging and cooling.
LIMAB produced laser sensors
LIMAB has been developing laser based, optical triangulation sensors for more than 30 years. The WireProfiler 3D integrates the LIMAB ProfiCura 2D sensor. The ProfiCura is a robust and very accurate sensor, available in several versions depending on the application. It is also stocked at LIMAB for fast spare part delivery.
End user certificates
Automatically generates end user certificate via level 2, containing measured key values of each individual wire and bar.
|Bar & Wire rod||Dimension (mm)||Dimension (inch)||Temperature|
|Up to 150||up to 6||0-1.200°C / 32-2,200°F|
|Larger dimensions on request|
|Number of laser sensors||To be defined depending on material dimensions|
|Sensor measurement rate||From 240 (Hz)|
|Laser class||Laser Class 3B according to EN 60825-1:2014 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.|
|Cooling air||2.000 (m³/h)|
|Cooling air temperature in gauge||10-30°C (50 – 86°F)|
|Gauge dimensions (HxWxL), from||2.000 x 1.700 x 600 mm (79 x 67 x 24”)|
|Electrical power requirements||230 VAC, 50Hz, 16A or 120VAC, (60 Hz)|